If you are quoting a Q-SYS Core system and the numbers do not close, here is the direct alternative: ADHOOPU 4K60 AV-over-IP endpoints and a single management platform that runs on the standard 1GbE switches you already deploy.
Q-SYS routing in this class normally depends on Q-SYS Core processor and Q-SYS Designer software as a separate layer. The ADHOOPU platform puts matrix switching, DSP, control and management into one 5-engine AV core platform — fewer boxes, fewer licences, fewer failure points.
H.264/H.265 encoding over standard managed switches with IGMP. No vendor-proprietary networking layer, and your IT team configures the network the same way they do for any multicast-aware system.
Pure encoders and decoders for classic TX/RX designs, plus a true encoder/decoder single-chassis unit for rooms that flip between send and receive — the Q-SYS role without the Q-SYS appliance stack.
Multiview and video wall layouts, plus USB 2.0 KVM extension over the same link for operator positions and meeting-room touch panels.
Every endpoint and platform ships with a 3-year warranty — longer than the standard warranty on the systems you are replacing.
A cost structure with real room for your margin, so the deal closes and you still get paid to commission it.
| Capability | Typical Q-SYS Core Stack | ADHOOPU Alternative |
|---|---|---|
| Matrix routing | Requires Q-SYS Core processor and Q-SYS Designer software for virtual matrix and central routing | Built into the QG-1169H 5-engine AV core platform — no separate management appliance |
| Control layer | Proprietary control processor and licensed control code | Built-in control engine (RS-232/485/IO/IR/Relay/TCP-UDP) plus open APIs |
| Endpoint types | Encoder, decoder and dual-role units across several product tiers | Encoder (QG-FBST52K), decoder (QG-FBSR52K), dual-role encoder/decoder (FBSLTR002/003) |
| Network | Multicast over managed switches, sometimes on a proprietary switching class | H.264/H.265 over the same standard 1GbE managed switches |
| Video wall | Configured through the management appliance or a dedicated processor | 8 to 32-layer video wall and multiview from the platform |
| USB / KVM | USB 2.0 extension on selected models | USB KVM extension over IP on encoder/decoder units |
| Audio | Audio de-embedding on selected models, DSP in a separate product family | Integrated DSP with audio matrix, EQ and AEC; analogue and HDMI audio de-embedding |
| Warranty | Standard 1-2 year regional warranty | 3-year warranty on every unit |
Specification sheets (PDF): QG-1169H integrated AV host datasheet — PDF, 4 pages · QG-FBST52K encoder datasheet — PDF, 4 pages All product datasheets
Comparison reflects the architecture class, not a single SKU. Confirm exact channel counts and feature requirements for your project.
Q-SYS is not one product, it is a Core plus whatever hangs off it. Most “Q-SYS is too expensive” conversations are really about the Core being specified at a size the room never uses, or about AV endpoints being licensed through the same core that runs the audio DSP. Separating the two parts makes the comparison honest.
Read that table as a shopping list rather than a scoreboard. If a project genuinely needs Q-SYS’s scripting depth or its ecosystem of certified peripherals, the honest recommendation is to keep it. The alternative exists for the far more common case: a room that needs routing, a wall, a bit of DSP and a control page, and is being quoted a Core plus endpoint licences to get them.
When a 60-channel processor is specified to serve a 12-seat room because that is the smallest unit that carries the required feature tier, the cost is in the architecture, not in the audio.
An AV-over-IP system for video and a separate DSP core for audio means two firmware cadences, two sets of backups and two failure modes for one meeting room.
Per-channel licensing that grows after the purchase order is signed lands on the integrator’s margin when the room count changes. A flat platform price moves that risk back to the design.
They run as an independent AV-over-IP system on the same physical network or on a dedicated VLAN. Most migration projects run both systems in parallel during phase-over, then move rooms one by one.
Nothing extra is needed. The QG-1169H 5-engine AV core platform provides matrix routing, video wall, DSP, recording, streaming and control in one chassis — or the distributed endpoints manage point-to-point routing without any appliance.
No. The platform exposes open TCP/UDP/HTTP APIs, and ADHOOPU provides integration support for common control platforms so your existing drivers can be adapted quickly.
The networked audio, video and control platform role is covered directly: the DSP, control and AV-over-IP transport roles are consolidated in one platform instead of a Core-plus-endpoints stack. For a project-specific endpoint count, ask for a configuration list and we will map each channel to the correct ADHOOPU unit.
Manufacturing is direct and in-house, so standard configurations ship from stock and project volumes are scheduled against confirmed orders — no dealer-network queue.
Yes. Hardware, firmware packaging and platform branding can be supplied under the partner's own brand for integrators, distributors and AV brands, after an introductory call and release of full technical documentation.
The platform carries a full audio path: input gain and phantom power, matrix mixing, parametric EQ, dynamics, delay and AEC on the conferencing inputs, with HDMI and analog de-embedding at the endpoints. What it does not carry is a scripting environment for arbitrary custom plugins — if a project depends on that, keep the Core and treat ADHOOPU as the video layer.
Yes. Audio leaves the ADHOOPU platform as analog or AES67/Dante and enters the amplifier chain exactly as a Core output would. The loudspeaker and amplifier selection does not change, which keeps the acoustics design and the commissioning measurements valid.
A single room is typically a one-day change: endpoints swapped, platform configured, existing display control re-pointed. A floor is scheduled room by room with both systems live in parallel, and the Core is retired only after the last room on that floor has run a full week on the new platform.
ADHOOPU is a q-sys alternative built for integrators who need the same performance without the stacked appliance costs, and for consultants comparing a Q-SYS replacement against the incumbent. The reason most projects switch is simple: Q-SYS needs a Core processor to run the DSP and control engine, and native AV-over-IP endpoints and Designer licences are charged per channel on top of that core. And the DSP, control and AV-over-IP transport roles are consolidated in one platform instead of a Core-plus-endpoints stack. Ask for a project-specific configuration and trial units at factory pricing.
Platform, endpoints and firmware ownership compared before you shortlist.
One decoder per panel, layout presets on-premise, no proprietary chassis.
Encoder/decoder pairing, bitrate per codec profile, latency budget per stage.
What distribution changes in the design, and who really owns the firmware.
Professional AV manufacturer — Integrated AV Platforms, Distributed AV over IP, and AI Edge Computing & Video Analytics. OEM/ODM for system integrators, distributors and AV brands worldwide.
19 years of AV engineering · Shenzhen, China · 3-year warranty