Home › Solutions › COMMAND CENTER / CONTROL ROOM

Command Center AV & Control Room AV over IP

Multi-screen video walls, KVM-over-IP control and real-time decision support for mission-critical control rooms — built for 24/7 operation on Linux, not Windows.

Command Center AVControl Room AV over IPKVM over IPMission Critical AVSecurity Operations Center AVEmergency Operations CenterMulti-Screen Control RoomWall Display Controller

Discuss Your Project Request Full Specifications

Customer Challenge

Control rooms must display dozens of sources on multi-screen walls, give operators KVM control of multiple machines, and stay up 24/7 — yet most stacks use Windows PCs and proprietary matrix switches that crash at the worst moment.

Multi-screen video wall

Any source to any screen — including picture-in-picture and quad-view
4K resolution per output with low-latency switching
Preset layouts for incidents, daily ops and stand-down

KVM over IP

Operators control remote machines from their desk with sub-frame latency
No extra KVM matrix hardware required
Per-operator permissions with audit logs

Mission critical reliability

Linux-based, no Windows update outages
Redundant power and storage options
3-year warranty with priority RMA

Real-time decision support

Side-by-side view of CCTV, SCADA, GIS and comms
Operator annotations overlay shared to the wall
One-touch escalation to incident mode

Distributed sources

Pull in CCTV, encoder / decoder feeds from remote sites
Integrate with existing VMS, BMS and dispatch systems
API-driven source roster updates

Operator ergonomics

Per-operator KVM, audio and intercom control
Day / night display presets for shift handover
Centralized logging of every operator action

ADHOOPU Architecture

The QG-FBST52K (encoder) + QG-FBSR52K (decoder) pair replaces the traditional video wall processor + matrix + KVM switch with a single IP-based fabric.

Layer 1 — AV over IP fabric

ST52K encoders at the source and SR52K decoders at each display — any source to any screen over the network, no fixed matrix.

Layer 2 — Wall processing & KVM

Wall layout, picture-in-picture, quad-view and operator KVM control — all from the same platform.

Layer 3 — Control & audit

Centralized operator control with role-based permissions, audit logs and incident presets.

Recommended Platform

Matched to the operator count and source count of the control room.

Model	QG-FBST52K (Encoder)	QG-FBSR52K (Decoder)
Role	Source-side, encodes HDMI / SDI to IP	Display-side, decodes IP to HDMI
Resolution	Up to 4K input / 4K stream	Up to 4K stream / 4K output
Latency	Sub-frame for KVM	Sub-frame for KVM
Best for	CCTV, SCADA, dispatch workstations	Video walls, operator desks, briefing rooms

Pair encoders and decoders in any quantity — the IP fabric scales from a 4-screen control room to a 100+ screen command center.

Business Value

What an IP-based control room delivers versus a fixed matrix + KVM stack.

1/3 the cost

An ADHOOPU AV-over-IP control room runs at roughly one third the cost of an equivalent Extron / Crestron video-wall + KVM stack.

Any-source to any-screen

No fixed matrix means new sources or new screens are added in minutes, not days.

Linux-based 24/7

No Windows update outages — designed for mission-critical 24/7 operation with redundant storage.

Single operator interface

One control surface for video wall, KVM and audio — operators learn it once.

Integration & Related Solutions

The control room platform fits into the wider ADHOOPU ecosystem.

AV over IP (ST52K / SR52K)

The fabric at the heart of the control room — see AV over IP for encoders, decoders and matrix switching.

Integrated AV (QG-1169)

For small control rooms, the QG-1169 adds DSP audio and central control to the wall fabric.

AI video analytics for SOC

Add AI video analytics for perimeter, intrusion and PPE monitoring on existing CCTV.

Mobile command vehicles

For mobile command posts, see mobile command.

FAQ

Common questions from control room operators, integrators and procurement teams.

How many screens and sources can the platform drive?

The IP fabric scales from a 4-screen room to a 100+ screen command center. ST52K encoders and SR52K decoders can be added in any quantity over standard network switches.

Is KVM-over-IP included, or do we need extra hardware?

KVM-over-IP is built into the ADHOOPU control room platform — no separate KVM matrix hardware is required.

What latency can operators expect?

Sub-frame latency for KVM control, suitable for real-time operator response.

Can we mix CCTV, SCADA and operator workstations on the same wall?

Yes. Any source — CCTV, SCADA, dispatch workstations, encoder feeds — can be routed to any screen, with picture-in-picture and quad-view layouts.

Does it run on Linux or Windows?

The platform is Linux-based — designed for 24/7 mission-critical operation without Windows update outages.

What redundancy is available?

Redundant storage and power options are available, with automatic failover for mission-critical sites.

What warranty is included?

All ADHOOPU platforms ship with a 3-year warranty, extendable for mission-critical procurement.

How does pricing compare to Extron or Crestron control rooms?

An ADHOOPU AV-over-IP control room runs at roughly one third the cost of an equivalent Extron or Crestron video-wall + KVM stack.

Can the system be private-labeled by our system integrator?

Yes — see OEM / ODM.