If you are quoting a Atlona OmniStream system and the numbers do not close, here is the direct alternative: ADHOOPU 4K60 AV-over-IP endpoints and an all-in-one management platform that runs on the standard 1GbE switches you already deploy.
Atlona routing in this class normally depends on Atlona Management System (AMS) and Velocity as a separate layer. The ADHOOPU platform puts matrix switching, DSP, control and management into one all-in-one platform — fewer boxes, fewer licences, fewer failure points.
H.264/H.265 encoding over standard managed switches with IGMP. No vendor-proprietary networking layer, and your IT team configures the network the same way they do for any multicast-aware system.
Pure encoders and decoders for classic TX/RX designs, plus a true encoder/decoder all-in-one unit for rooms that flip between send and receive — the AT-OMNI-111 role without the Atlona appliance stack.
Multiview and video wall layouts, plus USB 2.0 KVM extension over the same link for operator positions and meeting-room touch panels.
Every endpoint and platform ships with a 3-year warranty — longer than the standard warranty on the systems you are replacing.
A cost structure with real room for your margin, so the deal closes and you still get paid to commission it.
| Capability | Typical Atlona OmniStream Stack | ADHOOPU Alternative |
|---|---|---|
| Matrix routing | Requires Atlona Management System (AMS) and Velocity for virtual matrix and central routing | Built into the QG-1169 all-in-one platform — no separate management appliance |
| Control layer | Proprietary control processor and licensed control code | Built-in control engine (RS-232/485/IO/IR/Relay/TCP-UDP) plus open APIs |
| Endpoint types | Encoder, decoder and dual-role units across several product tiers | Encoder (QG-FBST52K), decoder (QG-FBSR52K), dual-role encoder/decoder (FBSLTR002/003) |
| Network | Multicast over managed switches, sometimes on a proprietary switching class | H.264/H.265 over the same standard 1GbE managed switches |
| Video wall | Configured through the management appliance or a dedicated processor | 8 to 32-layer video wall and multiview from the platform |
| USB / KVM | USB 2.0 extension on selected models | USB KVM extension over IP on encoder/decoder units |
| Audio | Audio de-embedding on selected models, DSP in a separate product family | Integrated DSP with audio matrix, EQ and AEC; analogue and HDMI audio de-embedding |
| Warranty | Standard 1-2 year regional warranty | 3-year warranty on every unit |
Comparison reflects the architecture class, not a single SKU. Confirm exact channel counts and feature requirements for your project.
They run as an independent AV-over-IP system on the same physical network or on a dedicated VLAN. Most migration projects run both systems in parallel during phase-over, then move rooms one by one.
Nothing extra is needed. The QG-1169 all-in-one platform provides matrix routing, video wall, DSP, recording, streaming and control in one chassis — or the distributed endpoints manage point-to-point routing without any appliance.
No. The platform exposes open TCP/UDP/HTTP APIs, and ADHOOPU provides integration support for common control platforms so your existing drivers can be adapted quickly.
The encoder role is covered directly: device management and room control are part of the same platform as the transport. For a project-specific endpoint count, ask for a configuration list and we will map each channel to the correct ADHOOPU unit.
Manufacturing is direct and in-house, so standard configurations ship from stock and project volumes are scheduled against confirmed orders — no dealer-network queue.
Yes. Hardware, firmware packaging and platform branding can be supplied under the partner's own brand for integrators, distributors and AV brands, after an introductory call and release of full technical documentation.
ADHOOPU is a atlona omnistream 111 alternative built for integrators who need the same performance without the stacked appliance costs, and for consultants comparing a AT-OMNI-111 replacement against the incumbent. The reason most projects switch is simple: OmniStream projects usually add AMS for device management and Velocity for control on top of the endpoints. And device management and room control are part of the same platform as the transport. Ask for a project-specific configuration and trial units at factory pricing.
Comparing a full bill of materials? These are the other replacement options and equivalent platforms integrators most often weigh against this one.
Professional AV manufacturer — Integrated AV Platforms, Distributed AV over IP, and AI Edge Computing & Video Analytics. OEM/ODM for system integrators, distributors and AV brands worldwide.
19 years of AV engineering · Shenzhen, China · 3-year warranty